3 Things That You Shouldn’t Do With Your Industrial Air Compressor

3 Things That You Shouldn’t Do With Your Industrial Air Compressor

07 June

If you run a factory or other industrial-type business and need to use an air compressor on a regular basis, you probably know how much of a disaster it can be if your compressor fails. Therefore, proper maintenance is critical, and there are some things that you should avoid doing. These are three things that you shouldn’t do if you want to keep your industrial air compressor in good condition.

1. Use a Hose That’s Too Long

It can be tempting to attach a long hose to your industrial air compressor so that you can get more use out of your machine. However, a hose that is too long can put too much of a strain on your system, which can cause it to wear out prematurely. This is caused by your air compressor needing to put out more air to fill such a long hose, which can strain the motor. Therefore, you should consult the owner’s manual for your air compressor to determine the maximum recommended hose length. If you find that your air compressor cannot be used with the length of hose that you need, you might need to upgrade to a larger air compressor.

2. Forget to Empty the Water

Throughout the day, the moisture from the air can get into your air compressor. If this water isn’t removed, it could cause the inside of your air tank to become rusty and corroded. Luckily, it’s simple to empty out the water each day when you are finished using your air compressor. There should be a valve in place that you can use to let the water out.

3. Avoid Cleaning the Filter

The filter in your air compressor needs to be cleaned each time that you empty the water. Basically, you have to think about all of the dust and debris that is in the air in your factory. This dust and debris gets caught by the filter in your air compressor, but this filter can become clogged if you don’t clean it frequently enough. Then, you could lose air pressure, and your air compressor’s motor could burn out from getting too heated. Luckily, it only takes a minute to clean your filter. Simply remove it with the latch on your air compressor, and shake it off to clean it.

In your industrial setting, you probably rely on your air compressor to get through the day. Therefore, you probably cannot afford for your air compressor to stop working at the wrong moment. Luckily, doing proper maintenance and avoiding a few certain things can help you prevent damage to your air compressor. Then, you can continue using it for a long time to come without having to worry about serious repair issues or the need for an expensive air compressor replacement. To find out more about air compressors, contact a business like kruman equipment.